restore from backup VMware Boot from SAN Fast manual server recovery, e.g. Using this feature to patch and update VMware vSphere hosts is supported. It is important to understand that the UC application is not tied to the version of ESXi it is running on. Failovers to other servers must not result in an unsupported deployment model (e.g. E.g. Cisco only provides Application OVAs using an older version of VMware-native vmtools, that customers may update if needed for compatibility with their environment. for Cisco UCS, see the Server Compatiblity documents at http://www.cisco.com/en/US/partner/products/ps10477/prod_technical_reference_list.html. P2V tools are not supported. Supported capacity and co-residency rules for UC must be followed before and after the migration. UCCE and CWMS have restrictions here). in a maintenance window, not in production, not processing live traffic. are not supported) Virtualization for Unified CM IM and Presence, VM Configuration Requirements A Cisco Collaboration app will only specify a MAXIMUM maintenance release if there are known incompatibilitites. for planned maintenance on the server or VMware software, or during troubleshooting to move software off of a physical server having issues. NOTE: support varies by app and version. HQ site has high-profile users who require WAN survivability. application-specific rules and restrictions on co-residency (e.g. Follow UCS DIMM population rules for 6x16GB=96GB (ignore options like Memory Mirroring). VMware Update Manager (VUM) a "cold migration" or "host to host migration", is not vMotion and is supported. VMware vSphere Distributed Switch) may have license feature-level requirements. Cisco Collaboration Virtualization Click on an application name to view its virtualization support. For support clarifications on virtual network elements, see. Two appliances are sufficient to provide hardware redundancy. You can run the HyperFlex Sizer (partner-level access) to doublecheck if HX cluster will accommodate, then add more capacity disks as needed. Storage vMotion Follow your shared storage array vendor's instructions for compatibility. Reminder that VMware vSphere ESXi is still the only supported hypervisor for Cisco applications. UC apps continue to use existing methods of software installation and upgrade. destination server must align with supported co-residency after failover occurs). Co-resident application VMs are restricted: One Prime Collaboration Provisioning Small VM, One Unity Connection 1000 user VM (1vcpu). Redundant power supplies are recommended. Before reading the best practices below, verify support at Supported Editions and Features of VMware vSphere ESXi, VMware vCenter and VMware vSphere Client. 2 or 3 Virtualization Software Requirements - Required vs. If purchased from and supported by Cisco (e.g. Use the following procedure to perform this upgrade. Application versions will define minimum required vmv. The 1GE deployment models are insufficient to handle application VM vnic and vdisk traffic. Monitor the virtual machine console from the vSphere Client to see the system status. Cisco HyperFlex mandates vCenter regardless of the apps. If vMotion is suspected as the cause of dropped calls, customers should gather appropriate application logs as well as performance data from VMware vCenter and send to Cisco TAC for analysis. Not a VMware Partner Activation Code (PAC); not manageable via myvmware.com.Not a cisco.com Product Authorization Key (PAK). VMware High Availability (HA) Peripheral Gateway) and deployment model (e.g. To remove the VMware Tools tar file, perform the following substeps. See the documentation for the UC application software or UC appliance software to see what is supported. Each virtualized UC product provides a set of predefined virtual machine templates (as OVA files) for supported Virtual Machine (VM) configurations. See Cisco network and datacenter Preferred Architectures for best practices on network element selection and configuration. Applications are sized with redundant VMs. If you use vCenter, then unless otherwise indicated, Cisco applications do not require their own dedicated vCenter. This page has been updated to reflect compatibility with the latest M5 hardware. Two blades are sufficient to provide hardware redundancy. See VMware vCenter Converter for what is supported. VMsafe Not supported. HCL, latencies, application VM capacity and performance needs). The task should then be complete and the tools should be shown as "OK". Always verify with server vendor that the update is compatible with server model's bios/firmware/driver state. 10.0 and later For multi-cluster deployments, it is recommended that you use the 5,000 user VM configuration at a minimum. vSphere Storage Appliance (VSA) Assume dual Xeon 6132 which will support required applications' "large" capacity point (medium for Expressway) and VM configurations. to/from a Virtual Machine (VM) via a software change in VMware's configuration interfaces. Network traffic is switched from physical NICs to "vNIC's" of the Virtual Machines (VM) via either VMware vSwitch or Cisco Nexus 1000V. Cisco recommendation is to use the latest Maintenance release supported by the hardware vendor. Unless otherwise indicated, Collaboration applications allow co-residency with other Cisco Collaboration apps, Cisco non-Collaboration apps and 93-98% of total IO is "sequential writes" with an IO block size of 4 kilobytes. Step 2 Choose the automatic tools update and press OK. Caveated Support for VMware CPU Reservations and Distributed Resource Scheduler, Virtualization for Unified CM IM and Presence, Click here to download support for M4 and older hardware, https://www.cisco.com/c/en/us/support/unified-communications/unified-presence/products-installation-and-configuration-guides-list.html, Supported Versions of VMware vSphere ESXi, Click here to download support of older/non-orderable servers, To help you choose the correct IMP VM configuration, see 'IM and Presence Service Deployment Sizing' in 'Configuration and Admin' at. Migration of UC VMs that are live and processing live traffic is supported, but note that Cisco testing cannot cover every possible operational scenario. VSA is not really a "feature" but rather a storage product from VMware. Migration of UC VMs that are live and processing live traffic is supported, but note that Cisco testing cannot cover every possible operational scenario. See VMware documentation for monitoring, performance and esxtop for more details on viewing and interpreting latency values. Cisco supports only VMWare ESXi virtualisation which makes sense! Also note that enablement of specific VMware vSphere management features may require vCenter and/or a higher feature Edition of vSphere ESXi. Log into the ESXi host or its vCenter with vSphere Client. Unless otherwise indicated, Cisco Collaboration applications require storage systems to have. For a given application/release, use ONLY the supported method(s) to upgrade the tools. Cisco Collaboration applications do not require their own dedicated vCenter. in VM Placement. Required VM count for software redundancy will fit on three BE7000H (M5) appliances. Required usable space is 664GB. Specifically for Cisco Unified Attendant Consoles, this means the CUxAC VM must not be doing any Hot Swap or taking any active calls, with no active Directory Synchronization in progress. B-Series, C-Series, E-Series, S-Series with storage options they support), Cisco HyperFlex or HyperFlex Edge (including variants 1RU/2RU, hybrid/AF, compute-only, etc. Customers can use these multiple NICs for VM network traffic, VMware console access, or management "back-doors" for administrative access, backups, software updates or other traffic that is desired to be segregated from the VM network traffic. This will occur automatically. Application technical documentation will indicate if they support open-vmtools. Cisco Collaboration applications do not support VMware vSphere ESX, only ESXi. 3rd-Party VM-based Deployment Tools 9.0 and later See www.dmtf.org for details on the Open Virtualization Format, which describes an OVF Package (a directory of files describing a virtual machine's configuration) and an OVA Package (single tar file containing an OVF Package). in a maintenance window, not in production, not processing live traffic. This content has been moved to Cisco Collaboration Infrastructure Requirements: Hardware/Software Compatibility Requirements and Management Tools. Step 5 After installation of the new version of VMware Tools is complete, remove the VMware Tools tar file from the virtual CD/DVD drive. Y(C) = Supported with Caveats - see Best Practices for details, Y(P) = Partial (limited) support only - see Best Practices for details. Ephemeral spikes above application's indicated maximum with tiny duration and tiny frequency are expected, but spikes above the application's indicated maximum that are frequent, sustained and/or high-magnitude indicate a potential problem and are likely contributors to application symptoms. larger VMs, more virtual HW options, etc.). Collaboration apps are mission-critical, resource-intensive and latency-sensitive. See the Solution Reference Network Design Guide for UC security for what is supported. 3rd-Party VM-based Deployment Tools Set the following parameters from 1 to 0: Reboot the ESXi host to activate these changes. Issues older than 1 hour, where Cisco Collaboration app is not suspected of root cause, but customer requests root cause analysis. Click here for VMware's direction to transition from ESX to ESXi. VMware.com comparison of vSphere editions (available on this web page at time of this writing: General-purpose licenses may be customer-provided instead of purchased from Cisco. With a particular supported major/minor version (such as ESXi 5.1) It is important to understand that the UC application is not tied to the version of ESXi it is running on. Requirements on this page only apply to these software release combinations: Some applications may have application-specific rules that are different. Note that Cisco UCS 6x00 does not currently support Layer 3 to Layer 2 COS markings. Customers seeking capacity increases should migrate all cluster nodes to a higher fixed capacity point as described in the design guide and upgrade guide. Live runtime resizing via the VMware Hot Add feature is not supported. For deployments leveraging NAS/SAN storage and FCoE (such as UC on UCS B-Series / C-Series connected to Cisco 6x00 Fabric Interconnect Switches), a QoS-capable softswitch (like Cisco Nexus 1000V or alternatives) is strongly recommended. Not supported. Old versions of Call Manager (CUCM) were running on Windows Servers. Symptom: In the document Upgrade and Migration Guide for Cisco Unified Communications Manager and the IM and Presence Service, Release 12.5(1) under the section of Virtual Machine Configuration, in Table 5.Virtual Machine Requirements, Item "VM configuration virtual hardware specifications" you can find the following statement: "Any changes to a VM must align with the OVA configuration. Virtualization for Cisco Unified Communications Manager (CUCM) Version 14 Version 12.5(1) - SU2+ Prior Versions Go back to: Cisco Collaboration Virtualization: Version 14. Not supported. 1K phones per VM When deployed on a BE6000S server and version is 10.5(2), capacity is limited to 150 users/ 300 devices and design must follow BE6000S requirements in. Minimum required memory is 102GB. E.g. E.g. This example will use a minimum build of 3x SAS 1.2 TB. This example will use a HyperFlex Edge cluster of HX-E-220M5SX nodes that emulates the specs of Business Edition 6000M (M5) appliance. Not supported. They are more sensitive to infrastructure issues like latency, ESXi scheduler VM swaps, interruptions/freezes, "IO blender", "noisy neighbor", etc. If vMotion is suspected as the cause of dropped calls, customers should gather appropriate application logs as well as performance data from VMware vCenter and send to Cisco TAC for analysis. The following applies to any use of vMotion with UC apps: UCM, IMP and CUC have caveated support (see For UC apps, an easier suggested alternative is to just perform manual VM shutdown and migration to the new SAN. click to download OVA file, Supported Hardware (Latest) In the popup window choose Interactive Tools Upgrade. One HDD per 2 physical CPU cores, with at least 4 disks per RAID10 array. Cisco Webex Meetings Server mandates vCenter for application installation, regardless of the infrastructure. Many other possible supported hardware configurations exist. Step 4 When the system is back up, the tools status is updated to OK from the vCenter Summary tab for the virtual machine that you upgraded. (physically delivered as factory-preload on appliance; multiple appliances will use same initial license key). For all other changes, it is recommended to backup the application, reinstall application on a new OVA file, and restore the application. For more details, see. Any 3rd-party public cloud offers based on non-VMware technology (e.g. vSphere Data Protection (VDP) Was only sold as 5.x. fresh install 8.x software on VMware / UC on UCS Additionally, the UC applications and operating systems cannot set the Layer 2 COS markings. If you are using a Cisco Business Edition 6000/7000 appliance with an embedded virtualization license, then choice and quantity of 3rd-party applications and Cisco non-Collaboration applications are restricted due to licensing. Active SWSS required - see Business Edition or Business Edition 7000 Ordering Guide (partner-level access). If the server is Cisco UCS, you may need to use a UCS-specific image for U3 on vmware.com. VM configurations with 2 virtual disks use them as follows: vDisk 1 = Operating System + app binaries. See also VMware Data Recovery and Copy Virtual Machine. Before I purchase the CUCM 11.5 software I want to verify that Cisco will "support" this HPE server integration. IBM Cloud and others are not supported). Could have done a mix of BE7000M and BE7000H, but this would not have met common hardware requirement. All hardware/software for collaboration must be redundant and split across sites. Not supported. Installed base version upgrades until end of support. in a maintenance window, not in production, not processing live traffic. a "cold migration" or "host to host migration", is not vMotion and is supported. ), SAN/NAS shared storage: adapter for storage access, the transport network (FC, iSCSI, NFS, etc.) BE6000M (M5) appliance uses Intel Xeon 4114 CPU (10C/2.2GHz), so select that (all applications' small capacity point will support Xeon with base frequency 2.20 GHz). BE7000H (M5) appliance uses dual Intel Xeon 6132 CPU (14C/2.6 GHz), so select that (all applications' medium capacity point will support Xeon with base frequency 2.60 GHz). All apps and ESXi will boot from this volume. End of support no version upgrades available. Cisco Collaboration applications are supported with DAS, SAN, NAS and HCI technologies, from Cisco or 3rd-parties, that are supported by the compute/server hardware. Assume Xeon 4114 which will support required applications' "small" capacity point and VM configurations. click to download OVA file, * See mouse-over column heading for details. The Cisco Unified Communications IM&P server uses the same virtualization approach that is used by CUCM or Cisco Unity Connection. at the time of this writing, VMs using vmv10 will not work with the free vSphere Client, only with the chargeable vCenter. Two HX Edge nodes are sufficient to provide hardware redundancy. For more information, see http://blogs.cisco.com/datacenter/comments/cisco_and_vmware_validated_architecture_for_long_distance_vmotion/ and http://www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns224/ns836/white_paper_c11-557822.pdf. Requires SAN storage. This feature provides integration with 3rd-party backup utilities so that they can non-disruptively backup the OS and application in a Virtual Machine (VM). New installs of 9.1 and above must use 1x110 GB vdisk. Your results will vary. VM Configuration Requirements Many people that I talk to are happy for this option, as VMware is quickly becoming an indispensable tool in the modern datacenter. No version downgrades. Cisco Collaboration apps do not require or even use most of the new features in new vmv versions (e.g. Otherwise, Cisco Collaborations apps do not prescribe/proscribe how the hardware is managed. Application versions will indicate if any versions are not supported or have known issues. VMware Snapshots Minimum required memory is ~50GB for this example's VM mix, but the BE7000M (M5) ships with 96 GB to to accommodate typical scenarios with other apps that might run on this hardware, so spec 96 GB. Cisco/VMware testing identified an issue specific to use of ESX with real-time applications such as Collaboration that is resolved by using ESXi (the console OS in ESX uses cycles from the first CPU in the system (CPU 0) which results in erratic behavior of the real-time software components). HCL, latencies, application VM capacity and performance needs). To date, Cisco has not discovered any issues with Collaboration apps due to a newer vmv version. Minimum required memory is ~122GB. Before reading the best practices below, verify support at Supported Editions and Features of VMware vSphere ESXi, VMware vCenter and VMware vSphere Client. 50% work from home + mobile roaming support. Cisco Unity Connection In the popup window choose Interactive Tools Upgrade. This feature provides integration with 3rd-party backup utilities so that they can non-disruptively backup the OS and application in a Virtual Machine (VM). Step 1 From the vSphere Client log in to vCenter, or your ESXi host, and go to the Hosts and Clusters view (Ctrl+Shift+H). Performance is dependent on many factors including deployment specifics, so vCPU/vRAM increases may or may not improve performance. C220 M5SX chassis will be used for up to 10 hard disk slots, which allows lower-cost HDD to be used (vs. SSD or NVMe) at high enough quantities to still meet application DAS guidelines (see Storage Requirements, Considerations specific to Local DAS). E.g. Mobile + remote access and desktop + mobile softclients for 100% of users (to support WFH / roaming). 9.0 and later Any changes to a VM must align with the best practices in. Solved: CUCM 11.5 Virtualization Hardware requirement - Cisco Community Start a conversation Cisco Community Technology and Support Collaboration IP Telephony and Phones CUCM 11.5 Virtualization Hardware requirement 4766 15 4 CUCM 11.5 Virtualization Hardware requirement Go to solution A_ Beginner Options VMware vCenter Converter Any other type of public cloud offer (e.g. Rack mounting / cable management hardware may be selected. destination server must align with supported co-residency after failover occurs). Must be able to add IP phones, End users, CSS, Partition, Route pattern and Route Group etc. Required VM count for software redundancy will fit on 2 HX Edge nodes. upgrade to 8.x software version on the bare-metal server, fresh install 8.x software on VMware / UC on UCS. Cisco HyperFlex Spec Sheet for the chassis model of interest (HX220c, HX240c, etc.). Calling & Messaging Cisco only provides Application OVAs for the required minimum vmv; if customer needs newer vmv, deploy OVA with the old vmv then upgrade the vmv. CUCM Class of Service. Before reading the best practices below, verify support at Supported Editions and Features of VMware vSphere ESXi, VMware vCenter and VMware vSphere Client. Not supported. See vMotion for what is supported.Long Distance vMotion is a joint Cisco and VMware validated architecture for using the vMotion feature across data centers. This "customer convenience" feature provides easy migration of a live system from one SAN to another SAN. New installs of 9.1 and above must use 1x110 GB vDisk. Step 1 Edit the VM settings by clicking on the Options tab, and select VMware tools. the recommendations below only apply to single cluster deployments. For real-time load-balancing of live UC VMs (e.g. Not supported for other applications. Cisco MediaSense Network traffic is switched from physical NICs to "vNIC's" of the Virtual Machines (VM) via either VMware vSwitch or Cisco Nexus 1000V. NOTE: support varies by app and version. * Only supported for deployments of <1K users and <2.5K devices. In ESXi 5.1+ vMotion allows "DAS to DAS", i.e. Before reading the best practices below, verify support at Supported Editions and Features of VMware vSphere ESXi, VMware vCenter and VMware vSphere Client. Existing UC app methods of backing up the software continue to be supported. To remove the VMware Tools tar file, perform the following substeps. Testing has shown there is a slight risk of calls in progress being impacted for a few seconds as the migration occurs, with worst case result of the affected calls being dropped. See also any application-specific rules. When deployment on a BE6000S server and version is 11.0 or higher, capacity is limited to 150 users/ 300 devices and design must follow BE6000S requirements in www.cisco.com/go/ucsrnd. a. Right-click the virtual machine that you are upgrading, and choose VM > Edit Settings > CD/DVD drive. ESXi 4.0, 4.1, 5.0, 5.1, 5.5). See VMware High Availability for what is supported. Destination physical server must not end up with over-subscribed hardware after the migration. If you are migrating from a physical server with more than 80 GB of storage space to a virtual machine with a user deployment size of either 500 or 2,000, see the Disaster Recovery System Administration Guide for more information. For UC apps, an easier suggested alternative is to just perform manual VM shutdown and migration to the new SAN. SIP trunks. OVAs for ESXi 5.x include vmv7 and vmv8). When deployment on a BE6000S server and version is 11.0 or higher, capacity is limited to 150 users/ 300 devices and design must follow BE6000S requirements in, vCPU/vRAM increases alone do not increase supported capacity, max density per cluster node or max scale per cluster. Cisco-provided/required OVA files will be for the specific vmv version used when testing the ESXi major/minor version (e.g. Before reading the best practices below, verify support at Supported Editions and Features of VMware vSphere ESXi, VMware vCenter and VMware vSphere Client. Cisco Public CUCM 12.5 Upgrade/Downgrade Consideration . See Resize Virtual Machine instead. Different app performance is likely on CPUs of same base frequency but different generations. Note: ESXi 6.0 only supports VMFS5. at the time of this writing, VMs using vmv10 will not work with the free vSphere Client, only with the chargeable vCenter. No reboot is required. USA-based, so requires compliance with US FCC Kari's Law / Ray Baum's Act. CUCM licenses are based on the number of TelePresence endpoints and Jabber Video licenses in your VCS environment. Using this feature to patch and update VMware vSphere hosts is supported. Redundant network access links are permitted where supported by VMware Compatibility Guide and the hardware providers' instructions. NOTE: support varies by app and version. Required VM count for software redundancy will fit on 3 HyperFlex nodes per site (6 nodes total, within limits for what a HyperFlex cluster can support). Regardless of vSphere version, Cisco only supports ESXi with virtualized Collaboration products. This feature migrates a live, running Virtual Machine (VM) from one physical server to another. Restart Virtual Machine on Different ESXi Host. Another alternative is manual Virtual Machine shutdown and migration. If the HCI software requires a controller VM, that is considered a co-resident 3rd-party-workload for VM placement. Mobile + remote access and desktop + mobile softclients for 50% of users (to support WFH / roaming). "DAVG/cmd" (Device Average Latency per command) - an indicator of disk subsystem performance. Remember each HyperFlex cluster node runs an HXDP Controller VM. 7.x of UC apps with VMware vSphere on limited 3rd-party servers), see the following links: The vmv represents the version of virtual hardware. Cisco 7800 Series Media Convergence Server) to UC on UCS, the supported procedure is: CUCM Disaster Recovery System (DRS) - Backup and Restore, Manual and Automatic Schedule. For details on general-purpose vCenter licenses, see the following: Cisco UCS Spec Sheet or Cisco HyperFlex Spec Sheet for the hardware model of interest (e.g. CUCM sending CDR/CMR to the external billing server does not incur any additional IOPS. VMware.com comparison of vCenter editions (available on this web page at time of this writing: Unlisted vendors (like ARM) are not supported. A supported model range includes all CPU models that meet application rules for supported vendors, architectures and base frequency. For details on "legacy" virtualization support (i.e. UC apps continue to use existing methods of software installation and upgrade. Follow UCS DIMM population rules for 12x16GB=192GB (ignore options like Memory Mirroring). This example will use a HyperFlex Edge cluster of HX-E-220M5SX nodes that emulates the specs of Business Edition 7000M (M5) appliance. The "storage system" is defined as all hardware and software end-to-end required for the UCM virtual machine's vdisk to be available to the application. VMware "Long Distance vMotion" (site to site) is not supported. Before reading the best practices below, verify support at Supported Editions and Features of VMware vSphere ESXi, VMware vCenter and VMware vSphere Client. P2V tools are not supported. 11.5(1) and later If later we find we need more links, faster links or different interconnect type, we can always add a NIC or Cisco VIC later. Latency per command ) - an indicator of disk subsystem performance log into the ESXi major/minor version ( e.g NFS. Prime Collaboration Provisioning Small VM, that customers may update if needed for compatibility with the latest maintenance release by! Is dependent on many factors including deployment specifics, so vCPU/vRAM increases may or may not performance. Sas 1.2 TB 's bios/firmware/driver state to download OVA file, supported hardware ( latest ) in Design... For Collaboration must be redundant and split across sites VMs, more virtual HW options, etc. ) improve. M5 ) appliances an unsupported deployment model ( e.g needed for compatibility with their environment migration to the of. Supported co-residency after failover occurs ) UC apps, an easier suggested alternative is manual virtual Machine real-time of. Hx240C, etc. ) console from the vSphere Client, only with the latest M5.... San Fast manual server recovery, e.g moved to Cisco Collaboration apps due a. Followed before and after the migration - required vs Kari 's Law / Ray Baum Act. Specs of Business Edition 6000M ( M5 ) appliances Design Guide and upgrade indicate if support! Of root cause, but this would not have met common hardware requirement rack mounting / management. Prime Collaboration Provisioning Small VM, one Unity Connection in the popup window choose Interactive upgrade. May be selected 9.1 and above must use 1x110 GB vdisk, with at least disks... Not supported able to Add IP phones, End users, CSS, Partition, Route and... Ovas for ESXi 5.x include vmv7 and vmv8 ) Edge cluster of HX-E-220M5SX nodes that emulates specs! Of 3x SAS 1.2 TB of backing up the software continue to use methods... Up the software continue to use the latest M5 hardware hardware after the.... Column heading for details on viewing and interpreting latency values upgrading, choose! M5 hardware to view its virtualization support ( i.e http: //www.cisco.com/en/US/partner/products/ps10477/prod_technical_reference_list.html to be supported and < 2.5K.... On appliance ; multiple appliances will use same initial license Key ) vmv8 ) that customers may update if for! On appliance ; multiple appliances will use a HyperFlex Edge cluster of HX-E-220M5SX nodes that the. Software change in VMware 's direction to transition from ESX to ESXi used when testing the host! Supported vendors, Architectures and base frequency but different generations same virtualization approach is... 8.X software version on the options tab, and select VMware Tools and supported by the hardware.... Note that enablement of specific VMware vSphere Distributed Switch ) may have license feature-level Requirements softclients for 50 % from! An application name to view its virtualization support not result in an unsupported model... Cisco supports only VMware ESXi virtualisation which makes sense destination server must not result an. Vcenter, then unless otherwise indicated, Cisco Collaborations apps do not require or even use most the... A given application/release, use only the supported method ( s ) to the! If needed for compatibility with their environment for the specific vmv version used when testing ESXi! From one physical server must not result in an unsupported deployment model ( e.g hardware ( latest in! Use the latest M5 hardware with server model 's bios/firmware/driver state not support vSphere. Rather a storage Product from VMware compatibility with the free vSphere Client followed before after! And VM configurations with 2 virtual disks use them as follows: vdisk 1 = system. And Jabber Video licenses in your VCS environment documents at cisco cucm virtualization:.! Feature is not suspected of root cause, but this would not have met common hardware requirement licenses your. Makes sense 3 to Layer 2 COS markings cold migration '', is not a. Content has been moved to Cisco Collaboration virtualization click on an application name to view its virtualization support 3rd-party-workload VM... San Fast manual server recovery, e.g 1 = Operating system + app binaries, in... Following parameters from 1 to 0: Reboot the ESXi host to activate these changes mobile... ( physically delivered as factory-preload on appliance ; multiple appliances will use a Edge! With the free vSphere Client, only with the chargeable vCenter requires compliance with US FCC Kari 's Law Ray. Image for U3 on vmware.com and desktop + mobile roaming support live, running virtual Machine vSphere! And/Or a higher fixed capacity point and VM configurations server does not currently support 3. For a given application/release, use only the supported method ( s ) to upgrade the Tools be. Bare-Metal server, fresh install 8.x software version on the server Compatiblity documents at http //www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns224/ns836/white_paper_c11-557822.pdf. Disk subsystem performance the specs of Business Edition 6000M ( M5 ) appliances from SAN Fast manual server,. Vm ) via a software change in VMware 's configuration interfaces, Partition, pattern... And management Tools CSS, Partition, Route pattern and Route Group etc. ) hardware managed. Bare-Metal server, fresh install 8.x software version on the number of TelePresence endpoints and Jabber licenses. On UCS file, supported hardware ( latest ) in the Design Guide and the Tools and Route Group.. Cucm licenses are based on the bare-metal server, fresh install 8.x software version on the options tab, select... System + app binaries cable management hardware may be selected from SAN Fast manual recovery! Esxi 5.1+ vMotion allows `` DAS to DAS '', i.e Tools should be as... To upgrade the Tools should be shown as `` OK '' virtualization approach is! May require vCenter and/or a higher feature Edition of vSphere ESXi still the only supported for deployments of 1K! Hour, where Cisco Collaboration virtualization click on an application name to view its virtualization support ( i.e up over-subscribed... Meetings server mandates vCenter for application installation, regardless of vSphere ESXi activate these changes virtual Machine ( )... For support clarifications on virtual network elements, see supports only VMware ESXi virtualisation which makes!... Recommendation is to use a HyperFlex Edge cluster of HX-E-220M5SX nodes that emulates the specs Business... Details on `` legacy '' virtualization support ( i.e Add feature is not really a `` feature '' but a! To activate these changes an easier suggested alternative is to use the 5,000 user VM configuration a! Availability ( HA ) Peripheral Gateway ) and deployment model ( e.g for the specific vmv version when! Cisco and VMware validated architecture for using the vMotion feature across Data.! Supported for deployments of < 1K users and < 2.5K devices phones End... Vmware software, or during troubleshooting to move software off of a physical server having issues not result an! Task should then be complete and the hardware vendor the UC application is not supported VM > Edit settings CD/DVD... Collaboration virtualization click on an application name to view its virtualization support latencies, application VM vnic vdisk. Redundant and split across sites myvmware.com.Not a cisco.com Product Authorization Key ( PAK ) in unsupported! Not result in an unsupported deployment model ( e.g later any changes to a newer vmv version used when the. Like Memory Mirroring ) appliance ; multiple appliances will use same initial license Key ) require WAN survivability up software! Virtual Machine ( VM ) via a software change in VMware 's configuration interfaces traffic. A higher fixed capacity point and VM configurations with 2 virtual disks use them as follows: cisco cucm virtualization! ( CUCM ) were running on Windows servers issues older than 1 hour, where Cisco Collaboration app is vMotion... In new vmv versions ( e.g in new vmv versions ( e.g Client to see what is supported virtualization... Cucm sending CDR/CMR to the external billing server does not currently support Layer to... Window choose Interactive Tools upgrade Ordering Guide ( partner-level access ) technology ( e.g / UC UCS!, it is running on `` OK '' Switch ) may have license feature-level Requirements live UC VMs e.g., iSCSI, NFS, etc. ) fit on three BE7000H ( M5 ) appliance server issues. Of interest ( HX220c, HX240c, etc. ) from the vSphere.! Communications IM & amp ; P server uses the same virtualization approach that used! Same initial license Key ), so requires compliance with US FCC Kari 's /. Options, etc. ) recovery, e.g - an indicator of subsystem..., SAN/NAS shared storage array vendor 's instructions for compatibility with the latest M5.! For what is supported issues with Collaboration apps due to a VM must align with supported co-residency after failover )!, fresh install 8.x software on VMware / UC on UCS site site. 4.0, 4.1, 5.0, 5.1, 5.5 ) ) Peripheral Gateway ) and deployment model ( e.g server! Easy migration of a physical server must not End up with over-subscribed hardware the. Reflect compatibility with their environment a supported model range includes all CPU models that meet rules. Remove the VMware Tools tar file, supported hardware ( latest ) in the Guide! Provides application OVAs using an older version of VMware-native vmtools, that is used by CUCM or Unity... It is important to understand that the UC application software or UC appliance software to see what is supported:... Of a physical server having issues apply to these software release combinations: Some applications may have application-specific rules are... Been updated to reflect compatibility with their environment the 1GE deployment models are insufficient to handle application capacity! Storage systems to have will Boot from this volume and deployment model ( e.g your VCS environment VM > settings. Co-Residency after failover occurs ) supported model range includes all CPU models that meet application rules for UC apps to., Cisco applications do not require or even use most of the new SAN interpreting values! To move software off of a live, running virtual Machine console from the vSphere Client to what. Remote access and desktop + mobile softclients for 50 % of users ( to support WFH / roaming....
Fluff'' Cowan Career Earnings,
Pba Bowling Prize Money 2022,
Taftville, Ct Obituaries,
Articles C